The HeatmiserNeo Driver
8
Find neoHub
Object Type:
[OSM v20\HeatmiserNeo v20\Find]
Object Type:
[CDM v20\HeatmiserNeo v20\Find]
The Find neoHub object triggers the driver to start searching the local network for a neoHub.
A DHCP servers assigns an IP address to the neoHub, and if a local DNS server is available, the neoHub
can be accessed using the host name ‘Neo-hub.
yourdomain.com
’. If a local DNS server is not available,
and the DHCP server’s IP address leases are not visible, then the Find Now object (N) can find the neoHub
on the network.
Once you have set Find Now object (N) to ‘yes’, the driver will listen for a connect button press on the
neoHub. In addition, the driver attempts each IP address on the local subnet in turn, which can take a
while.
Optional start and end IP addresses may be specified to limit the range of the search. If they are not
specified, then IP address range of the North device is used.
Enable the Auto Find object (A) to re-find the neoHub if its IP address changes.
The State object (S) provides a description of which IP address the driver is currently attempting.
Description
Reference Type
Find Now
Set the driver to start searching for a
neoHub on the local IP network, then
press ‘connect’ on the neoHub
N
Obj\NoYes; Adjustable
Auto Find
Automatically attempt to find the neoHub
again if communications are lost
A
Obj\NoYes; Adjustable
Start IP address
Optional. First IP address to check for the
neoHub.
If not specified, then the first IP on the
local subnet will be used, eg ‘192.168.1.1’.
IS
Obj\IP; Adjustable
End IP Address
Optional. Last IP address to check for the
neoHub.
If not specified, then the last IP on the
local subnet will be used, eg
‘192.168.1.254’.
IE
Obj\IP; Adjustable
State
Description of current find action
S
Obj\Text
