Please read the entire instruction manual before using
the product and save it for future reference. We reserve
the right for any errors in the text or images and any
necessary changes made to technical data. If you have any
questions regarding technical problems please contact our
Customer Services.
Product description
• Complete set with 3 LED fixtures in brushed steel.
• 6 m connecting lead.
• Transformer, mounting plate and ground stakes included.
Package contents
• Instruction manual
• 3 light assemblies (cover, lamp, shaft and stake)
• Transformer
• 6 m cable with 3 spur connectors
• 3 LED lamps
Areas of use
• The garden lights are meant for indoor and outdoor use.
• Recommended operating temperature: −20 °C to + 40 °C.
Safety Instructions
• Directions and safety instructions must strictly be followed.
• Do not use the light in an environment where it could be
exposed to gas, steam or dust.
• Never look directly into the light source; it could damage
your eyes.
• Do not change or dismantle the product, the guarantee is no
longer valid if any parts have been dismantled or modified.
• Never use any sharp metal tools or other objects that
could scratch the exterior, if scratched it could start to rust.
• Only let a qualified technician perform repairs, using only
original parts.
• The garden lights are not toys. Keep children away
from the lights.
• Discard the light if damaged in any way.
Assembly Instructions
1. Check that all the parts included.
2. Mount the cover (A) onto the light (B): The cover has
a locking tab which fits the light’s upper section.
Carefully press and turn the covers clockwise onto
the lights until they are secure.
3. Press the light assembly (C) into the shaft socket (D).
4. Press the assembly securely onto the shaft.
5. Choose a location for the lights. Press the stake (E) into
the shaft if the lights are to be set into the ground or screw
them securely onto an appropriate surface.
6. Connect the cable from the light to one of the spur
connections on the connecting cable. Press together so
that the unit is secure and water protected. Use the same
procedure for all the lights.
7. Connect the free end of the cable to the transformer and
lock it with the cable’s locking cap.
8. Connect the transformer to a wall socket.
Care and Maintenance
• Carefully observe the safety instructions and
the assembly directions.
• Clean the lights with a soft sponge with lukewarm water
and a little detergent when needed.
Replacing the bulb
1. Unplug the transformer from the wall socket.
2. Lift off the light assembly and remove the LED.
3. Replace it with an LED of the same type.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure of how to dispose of this product,
please contact your municipality.
Technical data
Light source
12 V 1 W GU4, type MR11
(Warm white, 60°)
Transformer
Primary 230–240 V AC,
Sec. 12 V AC 500 mA (IP44)
Cable length
6 m
Protection class
IP44
Garden Lights
Art.no 18-2026 Model ELL-01-UK
36-3569
ELL-01
Ver
. 20131023
ENGLISH
GREAT BRITAIN • CUSTOMER SERVICE
tel. 08545 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
A
B
C
D
E
