North Atlantic Industries, Inc.
631.567.1100 / 631.567.1823 (fax)
6/12/2018
5330A Operations Manual Rev A6
110 Wilbur Place, Bohemia, NY 11716
Cage Code: 0VGU1
Page 14 of 24
Press the
button on any of the Channel
Displays, to enter the remote configuration menu as
shown above. Select
remote
button, and then the
desired port or J1.
USB Port Selection
Selection of the USB port is accomplished by simply
pressing the USB button. Once entered, hit
‘set’ button and unit will return to main display.
Note: the
USB
is now displayed next to the
Loc/Rem
button
Figure 15
– USB Port Selection
Ethernet Port Selection
Selection of the Ethernet port is accomplished by pressing the Ethernet address button and then adding a valid IP
address, Submask and Gateway address for your Ethernet network. The Ethernet Port used by the 5330A is
always Port 23. When completed, hit
‘set’ button and unit goes back to main display
Figure 16
– Ethernet Port Selection
IEEE-488 Port Selection
Selection of the IEEE-488
port is accomplished by pressing the
IEEE-488
address button and then adding a valid
address. When completed, hit
‘set’ button and unit goes back to main display
Figure 17
– IEEE-488 Port Selection
Note:
ETHERNET
is now displayed next to the Loc/Rem button
Note:
IEEE
is now displayed next to the
Loc/Rem
button
