North Atlantic 8810A, Programmer'S Reference Manual

Page: 32 / 50

Language Support
3.7 API-8810 HSR202 (Legacy)
The API-8810 HSR202 language is only support via the IEEE-488.1. The language is available
to provide backwards compatibility to the 8810 HSR202 units. Only the features that were
available for the 8810 HSR202 are supported with this language.
Function Syntax Comments
Serial Poll Status Byte Queries the track/latch state of the
channel.
I<cr><lf> or
i<cr><lf> or
>I<cr><lf> or
>i<cr><lf> Set the latch state for the active channel.
Track/Latch (Hold)
Angle
F<cr><lf> or
f<cr><lf> or
>F<cr><lf> or
>f<cr><lf> Set the track state for the active channel.
S<cr><lf> or
s<cr><lf> or
>S<cr><lf> or
>s<cr><lf> If Channel 1 Input is set for “Front
Panel”, this will set the Signal Mode to
SYNCHRO. Channel 1 is set as the
active channel.
If Channel Input is set for “Back
Connector” the Signal Mode
configuration is not modified. Channel 1
is set as the active channel. Channel Select
R<cr><lf> or
r<cr><lf> or
>R<cr><lf> or
>r<cr><lf> If Channel 1 Input is set for “Front
Panel”, this will set the Signal Mode to
RESOLVER. Channel 1 is set as the
active channel.
If Channel Input is set for “Back
Connector” the Signal Mode
configuration is not modified. Channel 2
is set as the active channel.
Power-Up Or Preset P<cr><lf> or
p<cr><lf> or
>P<cr><lf> or
>p<cr><lf> Resets the device to power-up or last
saved configuration.
North Atlantic Industries, Inc. 631.567.1100/631.567.1823 (fax) Revision 2.0.0.2 Reference Guide
110 Wilbur Place, Bohemia, NY 11716 www.naii.com / e-mail:sales@naii.com Page 32 of 50
8810A Programmer’s