Upgrading the Versalar Switch Router 15000 Software
6
305932-D Rev 00
c.
Click on the folder to which you want to copy the router files.
d.
Choose Edit > Paste.
The system copies the router files to the destination folder on your PC.
Installing Router Files on the Versalar 15000
To transfer the router files from your PC or UNIX workstation to the Versalar
15000, you must use TFTP or FTP. If you have not enabled FTP or TFTP on the
router, see Configuring Management and Differentiated Services for the Versalar
Switch Router 15000.
1.
If you have unsaved changes in your working configuration file, use the
save config
command to save the file to memory.
For example, enter the following command:
save config 9:config
2.
If your working configuration file is named config, use the
cp
command
to copy and rename the file.
For example, to make a copy of the file config and name it oldconf.cfg, enter:
cp config oldconf.cfg
3.
Use FTP or TFTP in binary mode to back up the files from the Versalar
15000 flash memory card to your management workstation.
4.
Use the
rm
command to delete the following files from the flash memory
card: atpdiag.rom, bcc.help, bflash_801.exe, capdiag.rom, config,
ifpdiag.rom, init.cfg, sspboot.ppc, sspdiag.exe, and v15k.exe.
Note:
For detailed information about the commands used in the following steps,
see Managing and Troubleshooting the Versalar Switch Router 15000.
Caution:
Make sure not to copy these files to the same directory where you
loaded the files from the CD.
Summary of Contents for Versalar 15000
Page 6: ......
Page 7: ...305932 D Rev 00 vii Tables Table 1 Versalar 15000 Files 2 ...
Page 8: ......