Nortel Versalar 15000, Software Manual, Page: 17 / 20

Upgrading the Versalar Switch Router 15000 Software
305932-D Rev 00
5
5.
Using the UNIX cp command, copy the Versalar 15000 executable and
support files from the CD to the directory that you created in step 1.
For example, copy the file config to the directory v15k_files by entering:
cp config /v15k_files
If you are using an HP-UX platform and the file names appear in capital
letters with file extensions (for example, CONFIG;1), either:
• Mount the CD again as described in “Mounting a CD (UNIX Only)” on
-3 .
or:
• Enter the
cp
command for each file as follows:
cp CONFIG\;1 /v15k_files/config
You must use the backslash (\) to prevent the shell from interpreting the
semicolon (;) as a command separator.
You can now copy the files from the UNIX workstation to the Versalar 15000.
Go to “Installing Router Files on the Versalar 15000” on
-6 .
Copying Router Files to a PC
To copy router files from the CD to a PC running Windows
®
95, 98 or Windows
NT ®
:
1.
Insert the CD into the CD-ROM drive.
2.
Choose Start > Programs > Windows Explorer.
The Windows Explorer window opens.
3.
In the Windows Explorer window, click on the CD-ROM drive icon (for
example, drive D).
You see a list of the files on the CD (see Table 1 on -2 ).
4.
Copy the files to a destination folder on your PC.
For example:
a.
Hold down the Shift key and click on each file that you want to copy.
The files are highlighted.
b.
Choose Edit > Copy.