manualshive.com logo in svg

Nortel SR1001, Installation Manual, Page: 76 / 82

Share
Download
Nortel SR1001 Installation Manual Download Page 76

64

APPENDIX A

Specifications

MIBs

SR1001 Installation Guide

Version 8.3.5

Table 33   Nortel Enterprise MIBs

Nortel MIB

Description

bundle.mib

Defines objects related to bundle and link configuration.

chassis.mib

Defines objects related to chassis serial number and model number.

config.mib

Defines objects related to saving configurations for network and flash.

dsx-tc.mib

Defines textual conventions for DSX MIBs. This MIB should be compiled before any 
other DSX MIBs. This MIB does not contain any objects that can be used for 
management operations.

dsx-te1.mib

Defines objects for interface cards that support TE1. These include configuration and 
statistics for ANSI/ATT/IETF and USER. These objects only pertain to Layer 1.

environment.mib

Defines environment-related objects, e.g., temperature, fans, etc.

ethernet.mib

Defines objects related to configuration and statistics for Ethernet interfaces.

fr.mib

Defines objects related to configuration and statistics for frame relay and MFR 
bundles.

ghdlc.mib

Defines objects related to configuration and statistics for generic HDLC bundles.

ip.mib

Defines objects related to IP addressable interfaces and static routes.

ppp.mib

Defines objects related to PPP/MLPPP bundles for configuration and statistics.

products.mib

Defines registration objects (sysObjectID) for various Nortel products.

qos.mib

Defines objects related to QOS monitoring and configuration. This release contains 
only Random Early Detect (RED) objects and class-based queuing.

smi.mib

Defines the top-level object assignments for the Nortel MIB tree. This MIB should be 
compiled before any other Nortel MIBs are compiled. This MIB does not contain any 
objects that can be used for management operations.

snmp.mib

Defines objects related to SNMP community and trap_host configurations.

system.mib

Defines objects related to system information, e.g., IP address, host name, and DNS.

Serial.mib

Defines objects related to configuration and statistics for Serial interfaces.

v35.mib

Defines objects related to configuration and statistics for V.35 interfaces.

Summary of Contents for SR1001



















































































Reviews:

No comments