Nortel RLC, Installation And Administration Manual

Page: 71 / 466

RLC Installation and Administration Guide 45
June 2005 RLC description
Administration software
Configuration and administration of the RLC is performed with Remote
Gateway 9100 Series Configuration Manager software, a Windows-based
application that is installed on your PC.
The software is provided on the Remote Gateway 9100 Series Product CD-
ROM. You can obtain the CD from your Nortel distributor or click on the
Software Downloads link at the following website:
www.nortel.com
Administration PC connection options
You can connect the administration PC to the RLC through the following:
„
an RS-232 connection to the administration PC’s serial port
„
a 10BaseT Ethernet interface connection
Remote Gateway 9100 Series Configuration Manager
Remote Gateway 9100 Series Configuration Manager allows you to configure
the RLC. It also provides the Configuration Wizard for first-time configuration.
The Configuration Wizard prompts you for the minimum information that is
needed to get the RLC communicating with the RLC on the host PBX. After the
initial configuration is completed, use Configuration Manager to administer the
RLC. Administration tasks include the following:
„
viewing the system status
„
performing upgrades, backups, or restores
„
making configuration changes
„
changing the administration password
Note: Configuration Manager alerts you when you must restart after you have
made a configuration change.