Nortel RLC, Installation And Administration Manual

Page: 30 / 466

4 RLC Installation and Administration Guide
RLC description Standard 4.0
CS 1000
To obtain the RLC requirements for CS 1000 PBXs, contact your Nortel
distributor.
CS 2100
The RLC’s required packages for CS 2100 PBXs are as follows:
„
X11 packages 0 and 121 contain all the four required Classes of Service.
— Package Number 0 (Basic Call Processing Package) includes FLXA,
VCE, and WTA.
— Package Number 121 (Station Camp-on) includes CPTA.
„
The following four feature sets of release 25.30 include both packages:
— NTSK11CQ: Meridian 1 PBX 11C General Business Feature Set
— NTSK11DQ: Meridian 1 PBX 11C Enhanced Business Feature Set
— NTSK11EQ: Meridian 1 PBX 11C Enterprise Business Feature Set
— NTSK11FQ: Meridian 1 PBX 11C nas/vns Feature Set
IPE vs. Meridian 1 PBX 11
You can purchase 32-port RLCs for both IPE shelves and Meridian 1 PBX 11
cabinets. Because the dimensions of card slots in IPE shelves and Meridian 1
PBX 11 cabinets differ slightly, Nortel offers two varieties of the 32-port RLC.
Each variety has its own order code, as outlined in the following table:
Regardless of order code, the motherboard of the 32-port RLC is the same
circuit pack that is used for the 16-port RLC. The illustration on page 6 shows
the circuit pack. The RLC motherboard conforms to the Common Features
Specification for IPE line cards.
Destination Order code
IPE shelf NTDR70xx
Meridian 1 PBX 11 cabinet NTDR71xx