Nortel RLC, Installation And Administration Manual

Page: 176 / 466

150 RLC Installation and Administration Guide
Using Configuration Manager Standard 4.0
Auto logoff
If the connection remains open with no activity for 15 minutes, then
Configuration Manager automatically logs off the connection and the Session
Timed Out message displays. This helps to secure the configuration in the event
that you walk away from the administration PC while logged on to a unit.
Logging on to a unit using the connection history
To log on to a unit using the connection history:
1 From the Menu Bar, choose Connect
→
XXX.XXX.XXX.XXX (IP address
of the unit you want to log on to).
Result: If no one else logged on to the unit before you and if IP connectivity
exists to this unit, the User Authentication for Telnet Mode dialog box
displays. It is similar to the following:
2 Enter your logon name in the Login Name field. If you have not yet
customized this setting, refer to “Default logon ID and password” on page
149 for the default logon ID.
3 Enter your password in the Password field. If you have not yet customized
this setting, refer to “Default logon ID and password” on page 149 for the
default password.