Nortel RLC, Installation And Administration Manual

Page: 167 / 466

RLC Installation and Administration Guide 141
June 2005 Using Configuration Manager
File
→
Save As When you choose File
→
Save As from the Menu Bar,
Configuration Manager saves the unit’s configuration to a
file on your PC. You must specify the file name and
directory location.
After saving the file, you can open and modify it at a later
time.
Notes:
„
Configuration Manager saves the file as a text (.txt) file.
„
If you close Configuration Manager without choosing
File
→
Save As, you lose all of the changes you made.
Send When you click on the Send button, Configuration Manager
sends any changes made on the displayed property sheet to
the buffer of the logged-on unit. If the send is successful, the
following message displays:
Data Sent Successfully
(Nortel recommends that you click on the OK button before
clicking on the Send button.)
Note: You must choose Upload/Download
→
Save to Flash
from the Menu Bar to save the changes to the unit’s Flash
memory. For more details, refer to “Save to Flash” on page
142.
Send All When you choose Upload/Download
→
Send All on any
property sheet, changes for all property sheets pertaining to
the logged-on unit are sent to the buffer on the unit you are
connected to. If the send is successful, the following
message displays:
Data Sent Successfully
Note: You must choose Upload/Download
→
Save to Flash
from the Menu Bar to save the changes to the unit’s Flash
memory. For more details, refer to “Save to Flash” on page
142.
Operation Description