Nortel Remote Office 9150, Installation And Administration Manual

Page: 54 / 570

26 Remote Gateway 9150 Installation and Administration Guide
Remote Gateway 9150 description Standard 4.0
Telephones
This section lists the telephones, modules, and related applications supported by
the Remote Gateway 9150 unit. This section also describes some of the basic
characteristics of these elements of a Remote Gateway 9100 Series system.
Supported digital telephone sets
The Remote Gateway 9150 unit supports following Meridian digital telephone
sets:
Notes:
1. Because it is a discontinued model, the M2616CT cordless digital
telephone set is no longer supported.
2. When you update the message on the host PBX that displays when the
digital telephone set is idle, you must unplug the digital telephone set and
plug it back in for the change to take effect.
Notes for M2xxx series digital telephone sets:
1. The M2006 digital telephone set is also supported, but can be used only for
locally controlled calls.
2. Auto Answer Back (AAB) activation on M26xx series digital telephone
sets on Remote Gateway 9100 Series units connected to CS 2100 PBXs
does not produce a dial tone. The digital telephone sets operate properly,
but no dial tone is present. To produce dial tone in this situation, configure
the port on the RLC as a TAPI port.
„
M2008D
„
M2008HFD
„
M2216D
„
M2616D
„
M3110
„
M3310
„
M3820
„
M3901
„
M3902
„
M3903
„
M3904
„
M3905