Nortel Remote Office 9150 Installation And Administration Manual Download

Page: 266 / 570

238

Remote Gateway 9150 Installation and Administration Guide

Configuring the Remote Gateway 9150 unit

Standard 4.0

Trunk Group
B Channels

Click on the

Trunk Group B Channels

button.

Result:

The Trunk Group B-Channel dialog box displays.

Complete the fields as follows:

Module: This field displays trunk interface module
numbers.

Device: This field displays the internal device number
for each B-channel provided by the module.

B Channel: This field displays B-channel numbers.

Check boxes: Click on the check box for each B-channel
you want to be part of this trunk group.

Note:

A B-channel can be a member of more than one trunk

group.

Click on the

button.

Field

Description

Summary of Contents for Remote Office 9150



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Remote Office 9150

Reviews:

Related manuals for Remote Office 9150

Brands by name

Popular brands

Nortel Remote Office 9150, Installation And Administration Manual

Search results

Summary of Contents for Remote Office 9150

Reviews:

Related manuals for Remote Office 9150

Brands by name

Popular brands