Nortel Passport 7400, Hardware Installation, Maintenance, And Troubleshooting, Page: 435 / 438

Chapter 37 Hardware procedures 435
Passport 7400 Hardware Installation, Maintenance, and Upgrade 5.2S1
Figure 167
Removing the pallet
As you pull the pallet back, the wooden slides that support the left and
right sides of the cabinet help you gently lower it down the ramp.
9 Tilt the cabinet to the left and right sides enough to remove the wooden
slides one after the other. This allows the cabinet to rest on its casters.
10 Roll the cabinet on its castors into the anchoring position. The casters are
intended for short distances and will not cross the threshold of a doorway
or elevator.
11 Adjust the levelers downward to remove the weight from the casters. Use
a spirit level to ensure that the cabinet is level.
one person must
remove the pallet after
you tilt the cabinet
two people must
support the cabinet
slides, left and
right
rear front