Nortel Optical Multiservice Edge 6130, Planning Manual, Page: 43 / 292

Hardware description 4-5
Planning Guide NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Figure 4-4
OME6130 DC power supply unit
Fan module
The OME6130 chassis is equipped with a fan module that is located on the
right side of the chassis, as shown in
Figure 4-2 on page 4-3 . Four fans are
integrated within the module and are continuously being monitored for
failures.
The air filter is field replaceable and it can be ordered separately for sparing or
replacement.
ESD interface
The ESD interface is located below the fan module and is used to connect an
antistatic wrist strap required when handling circuit packs to avoid damage as
a result of electrostatic discharge.
Figure 4-5 on page 4-6 shows the location
of the ESD interface below the fan module of the OME6130.
PSU (2)