Feature overview
2-15
Planning Guide NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Data communication network
OME6130 uses an IP-based data communications infrastructure for network
element management and for interworking with IP-based network elements.
OME6130 also supports IP over OSI via GRE for interworking with
OSI-based network elements. iISIS is supported as the internal DCN routing
protocol and can be enabled on the DCC interfaces.
The OME6130 supports the following types of management interfaces:
•
LAN port for interface to a data communications network (DCN).
Proxy ARP is supported on the LAN port.
•
M1/F1 port for modem and user data channel access.
•
RS, MS and Path (F2, F3 and F2-F3) DCC for OAM&P access to remote
network elements
•
management channel via VC12 circuit or E1 channel
•
overhead tunnel provisioning for DCC transparency (for interoperability
with other vendors’ equipment)
For more information, refer to
Data communications on page 6-22
. For more
information on DCN planning, refer to
Appendix A: Data communications
.
OME6130 management
Local Craft Access Terminal
The OME6130 supports a comprehensive suite of OAM&P functionality
which can be managed through a web-based local craft access user interface.
The local craft user interface is a graphical, nodal management tool that is
inherent on the network element software load and can be launched via a web
browser.
The local craft access user interface is launched from a web browser which can
be running on Windows, UNIX or Solaris workstations ensuring field
technicians and NOC operators are operating with the same view.
For more information, refer to
User interface description on page 5-1
.
SNMP traps
The OME6130 system events can be monitored through SNMP traps raised by
the NE, based on the MIB tables.
Summary of Contents for Optical Multiservice Edge 6130
Page 291: ......