Nortel Nortel Contivity Extranet Switch 4500, Getting Started

Page: 41 / 90

Assigning a System Identity
3-7
Procedure
1. Connect the serial cable from the Switch’s serial cable port to a PC
communications port.
Turn on the Switch. It can take the system approximately 3 minutes to
start up.
2.
Using a terminal emulation program, such as Hyper Terminal, press Enter
and then supply a user name and password. The factory default user name
and password are:
User name: admin
Password: setup
A menu appears that allows you to enter the following:
• Management IP address
• IP subnet mask
• Gateway IP address (optional)