
36 Upgrading a Norstar Voice Mail system with a 270 MB hard disk drive
Norstar Voice Mail 4.1 Software Upgrade Guide
P0994576 Issue 01
Restoring the Norstar Voice Mail programing
After the Norstar Voice Mail 4.1 software has been initialized, you can restore your
old Norstar Voice Mail configuration and programing to the replacement drive. If
your Norstar Voice Mail system is operating in a multiple applications scenario,
you must restore applications in the same order in which they were backed up.
To restore a Norstar Voice Mail system:
Restoring the NAM capabilities file
The NAM capabilities file (SEKUR file) contains all upgrade and capability
information about your Norstar Voice Mail system and must be restored along with
Norstar Voice Mail programing. If this file is not restored, all upgrades made to
your Norstar Voice Mail system are lost.
When you restore the SEKUR file you must make sure you are restoring the most
recent backup.
1. Press
Ä á ¡ Ü
.
2. Enter the System Coordinator Mailbox number and
password and press
OK
.
3. Press
Ü Ü
.
4. Press
CONT
.
5. Press
OK
. All Norstar Voice Mail programing data
is erased before the restore begins.
If calls are still active, the display shows:
Before the restore procedure can begin, all Norstar
Voice Mail channels must be idle. Norstar Voice
Mail automatically disables each channel as it
becomes idle. The display then shows:
6. Insert the appropriate disk and press
OK
.
7. The display continues to prompt for more disks until
the restore is complete. When the restore is
complete, the display shows:
8. Press
OK
. Press
¨
to end this programing
session.
Log:
QUIT RETRY OK
Admin
MBOX AA OTHR
Restore
QUITººººººº º
CONT
Confirmºrestore?
QUITºººººººº º
OK
Callsºcompleting
Insertºdiskº<x>
QUITºººººººº
OK
Restoringº<x>
QUIT
Restoreºcomplete
ºººººººººººººº
OK