manualshive.com logo in svg

Nortel Norstar Voice Mail 4.1, Software Manual, Page: 27 / 48

Share
Download
Nortel Norstar Voice Mail 4.1 Software Manual Download Page 27

Upgrading a Norstar Voice Mail system with a 270 MB hard disk drive  27

P0994576 Issue 01

Norstar Voice Mail 4.1 Software Upgrade Guide

Upgrading a Norstar Voice Mail system with a 270 MB hard disk drive

Preparation  

Loading Release 4.1

Completion

Attach the CD-ROM drive to NAM.

Power up CD-ROM drive & insert CD-ROM disk

Transfer the Norstar Voice Mail 4.1 files to 

the NAM

Enable the Norstar Voice Mail 4.1 Security Key Code. 

This step 

must

 be completed before attempting to 

load the Norstar Voice Mail 4.1 Software.

Backup NVM programing after the upgrade

Upgrade procedure completed

Initialize Norstar Voice Mail

Re-install Cintech Dial-by-Name (if required)

Check the size of the NAM hard disk drive.

Backup the Norstar Voice Mail programing and the 

NAM capabilities file.

Replace hard disk drive

Shutdown Norstar Voice Mail

Restore the Norstar Voice Mail programing and the 

NAM capabilities file.

Re-enable the monitor package (if required)

Test Norstar Voice Mail

•Verify NVM software version (Feature 983)

•Verify NVM Feature Codes (Feature 9*1)

•Verify the NVM Directory Number (DN)

Summary of Contents for Norstar Voice Mail 4.1

















































Reviews:

No comments