manualshive.com logo in svg

Nortel Norstar Voice Mail 4.1, Software Manual, Page: 23 / 48

Share
Download
Nortel Norstar Voice Mail 4.1 Software Manual Download Page 23

Norstar Voice Mail 4.1 Software Upgrade  23

P0994576 Issue 01

Norstar Voice Mail 4.1 Software Upgrade Guide

Updating Cintech Dial-by-Name

The methods used to upgrade the system software may cause Dial-by-Name (DBN) 
to fail to load after the system is rebooted. To resolve this problem, follow the steps 
below. All customer data associated with DBN will be retained, including phone 
books, phone book entries, and so on.

1. Place the original DBN floppy diskette in the NAM’s 

floppy disk drive.

2. Press 

Ä á Ú Þ 

.

3. Enter the default password

 

ÛÛÛÜààÛ

 

(ACCESS2).

4. Press 

ADMIN

 

.

5. Press 

NEXT

 until the display shows:

6. Press 

SHOW

 .

7. Press 

INSTL

 . The system will start loading DBN. 

When the installation is complete, the display will 
show:

8. Remove the DBN floppy diskette from the NAM’s 

floppy disk drive.

9. Press 

Ä á ß â 

.

10. If this display does not appear, contact your technical 

support representative for further instructions.

11. Press 

¨

 to end this programing session.

Password:

                            RETRY

ACCESS Server

BACK    NEXT      

ADMIN

A. Prt queue mgr

QUIT   

 NEXT 

       SHOW

H. Appl Install

QUIT     NEXT        

SHOW

Insert floppy

QUIT                     

I

NSTL

DBN Started

Name:

            SHOW            10+

Summary of Contents for Norstar Voice Mail 4.1

















































Reviews:

No comments