manualshive.com logo in svg

Nortel Norstar Voice Mail 4.1, Software Manual, Page: 10 / 48

Share
Download
Nortel Norstar Voice Mail 4.1 Software Manual Download Page 10

10  Norstar Voice Mail 4.1 Software Upgrade

Norstar Voice Mail 4.1 Software Upgrade Guide

P0994576 Issue 01

Norstar Voice Mail 4.1 Software Upgrade Overview

Preparing, loading and testing Release 4.1

Preparation  

Loading Release 4.1

Completion

Shutdown Norstar Voice Mail

Attach the CD-ROM drive to 

NAM

.

Power up CD-ROM drive & insert CD-ROM disk

Transfer the Norstar Voice Mail 4.1 files to 

the NAM

Backup NVM programing and the NAM capabilities 

file.

Enable the Norstar Voice Mail 4.1 Security Key Code. 

This step 

must

 be completed before attempting to load 

the Norstar Voice Mail 4.1 Software.

Check the Norstar Voice Mail software version.

Backup NVM Programing after the upgrade

Reset Norstar Voice Mail (if required)

Upgrade procedure completed

Test Norstar Voice Mail

•Verify NVM software version (Feature 983)

•Verify NVM Feature Codes (Feature 9*1)

•Verify the NVM Directory Number (DN)

Re-initialize Norstar Voice Mail (if required)

Update Cintech Dial-by-Name (if required)

Check the size of the NAM hard disk drive.

If the hard disk needs to be replaced, proceed to 

"Upgrading a Norstar 

Voice Mail system with a 270 MB hard disk drive"

 on page 25.

Summary of Contents for Norstar Voice Mail 4.1

















































Reviews:

No comments