manualshive.com logo in svg

Nortel NorStar M7310, System Coordinator Manual

Share
Download
Nortel NorStar M7310 System Coordinator Manual Download Page 56

Answering calls / 43

P0857846 Issue 02

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

3.

Press 

≠

 and enter the internal number of the telephone 

you wish to program.

4.

Press 

≠

 twice.

5.

Press 

‘

 three times.

6.

Choose a setting at 

Handsfree:

 using the 

CHANGE

 button. 

There are three ways to set Handsfree for an individual telephone:

Both Auto and standard Handsfree allow you to use a headset with 
a Norstar telephone.

A Handsfree/Mute button is automatically assigned to a telephone 
that is programmed with Handsfree and is always located in the 
lower right-hand corner of the telephone.

Handsfree Answerback

Handsfree Answerback allows you to answer a voice call without 
lifting the receiver. It is always turned off for an M7100 telephone.

You can turn Handsfree Answerback on or off fora telephone that is 
programmed to use Handsfree.

You will need the programming template found at the front of this 
guide. See Getting Started for more information.

1.

Press 

ƒ••¤flfl‹››

.

Handsfree is not available to the telephone.

You can make or answer a call without 
having to pick up the receiver or press 

©

. The telephone’s internal 

microphone and speaker turn on 
automatically when you press a line or 
intercom button to make or answer a call.

A standard version of Handsfree described 
“Using Handsfree/Mute” on page 40.

For other displays, see “Common feature displays” on page 149.

Summary of Contents for NorStar M7310




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands