manualshive.com logo in svg

Nortel NorStar M7310, System Coordinator Manual

Share
Download
Nortel NorStar M7310 System Coordinator Manual Download Page 31

18 / Frequently used programming operations

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

P0857846 Issue 02

Changing the name of a telephone

Begin the programming session 

 Change the name of a telephone

Press 

ƒ

.

Press

 

••¤flfl‹››

.

Press 

¤‹fl›fl

Press 

≠

.

Enter the internal number (DN) of the 
telephone or voice mail extension. In this 
example, it’s 221.

If the set has already been given a name, it will appear after 

DN:

 on the 

display.

Press 

≠

 

then

 

‘

.

This is the name the display will show if 
you don’t change it. Press 

CHANGE

.

Decide what name you want to give to the telephone number.

Press the telephone’s numeric dial pad 
button that has the first letter of the name 
until the display shows the letter you want.

Press 

-->

.

Use the dial pad and 

-->

 until you have 

the entire name.

Press  

‘

 to use the name you 

have entered.

The name can be up to 7 characters long, including spaces.

Press

 

®

 to end your session.

Summary of Contents for NorStar M7310




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands