Nortel Modular ICS 6.0, Manual

Page: 59 / 294

Answering calls / 59
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Putting a conference on hold
You can put a conference on hold, allowing the other two
people to continue speaking to each other by pressing
³.
You can reconnect to the conference by pressing either of the
held line buttons. For the M7100 telephone, press
³.
Splitting a conference
You can talk with one person while the other person is on hold.
You can activate this feature on all Norstar and Business
Series terminals except for M7100 or T7100 models.
1. Press the line button of the person you want to speak to.
The other person is automatically put on hold.
On an M7100 or a T7100 set:
1. Press
²£Ü. The first party is on hold.
2. Press
³, if necessary, to switch parties.
You can re-establish the conference.
1. Press
²Ü.
2. Take the held call off hold. This is not necessary.
Removing yourself from a conference
You can remove yourself from a conference, and connect the
other two callers through your Norstar system.
1. Enter the Transfer feature code
²àâ.
When you remove yourself from a conference using the
Transfer feature, and both callers are from outside your