Nortel Modular ICS 6.0, Manual, Page: 227 / 294

Using System features / 227
P0992640 03 Modular ICS 6.0 System Coordinator Guide
The Run/Stop symbol (
fl
) uses one of the 24 spaces in an
autodial or speed dial sequence.
You can include up to three Run/Stop commands in a dialing
string. The system ignores a fourth Run/Stop, and any digits or
commands that follow it in a programmed dialing sequence.
Wait for Dial Tone
²¡âÝ
Wait for Dial Tone causes a sequence of numbers to pause
until dial tone is present on the line before continuing to dial.
This is useful if you must dial a remote system and then wait
for dial tone from that system before dialing the rest of your
number.
The Wait for Dial Tone symbol (
‡
) uses two of the 24 spaces
in an autodial or speed dial sequence.
Displays
Using pulse dialing for a call
If your external telephone lines use pulse dialing, you can
temporarily switch to tone dialing by pressing
£ after
selecting the line. Tone dialing allows your Norstar telephone
communicate with devices and services that respond to tone
signals, such as automatic switchboards, and fax or answering
machines.
You have entered a code that can be
used only in a programmed autodial or
speed dial sequence, not on a call you
dial directly. Programmed Release and
Run/Stop are for use in programmed
dialing sequences only.
Invalid code