Nortel Modular ICS 6.0, Manual

Page: 183 / 294

Using the Hospitality features / 183
P0992640 03 Modular ICS 6.0 System Coordinator Guide
18. Press
CHANGE
to choose either
Y
(yes) or
N
(no).
19. Press
¨ to exit or
‘
to continue programming.
Using the Administration set to control alarms
Only a Hospitality Services set can use this alarm
administration feature. This feature is also associated with a
room number, and cannot be used on common sets.
Use this feature to:
• query a current or last alarm time set for a room
• assign an alarm time for any room
• change an alarm time for any room
• cancel an pending alarm for any room
To program the alarm, follow these steps:
1. Press
²¡àà.
2. Enter the Desk admin password if you are prompted for a
password.
The set displays:
al of rm#
:
3. Enter the room number.
4. Press
VIEW
. The set displays
Alrm: 07:00am OFF:
.
If the alarm time is correct, press the
ON/OFF
display key.
If you want to change the time, enter a new four-digit
alarm time.
If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. The set
displays:
Alarm ON hh:mm