Nortel Modular ICS 6.0, Manual

Page: 156 / 294

156 / User Preferences
Modular ICS 6.0 System Coordinator Guide P0992640 03
connected at that internal number. You cannot make
changes if the model is
Other
.
3. Press
‘
to move through all the subheadings in
User Preferences.
User Preferences programming is available under the heading
User Prefernces in Terminals&Sets in the main body of
programming.
Sub-headings in User Preferences
Changing button programming
Press
≠
at
Button prgrming
. The display shows the
number of buttons on the telephone. An example is shown in
Displays at the end of this section.
If the telephone has a CAP module, you can press
CAP1
to see
the buttons on the module.
Press
‘
to move through all the buttons on the
telephone.Refer to
Default button assignments
on page 142 for
button number mapping for each type of Business Series
Terminal and Norstar series telephones.
User prefernces
Model
Button prgrming
User speed dial
Call log opt’ns
Dialing opt’ns
Language
Display cntrst
Ring type
Voice path