Nortel Modular ICS 6.0, Manual

Page: 138 / 294

138 / Customizing your telephone
Modular ICS 6.0 System Coordinator Guide P0992640 03
Changing the set display contrast
Use this feature to adjust the contrast on your set.
1. Press
²¥à.
2. Press a number on the dialpad to choose the contrast level
you prefer.
On a two-line telephone, you can use the
UP
and
DOWN
display
buttons to adjust the contrast. The number of contrast levels
available varies from one telephone model to another.
Changing the language on the display
You can select the language used on the display of each set.
The languages supported depends on which Profile was
installed on your system at Startup.
English is the default first language.
Refer to the
Modular ICS 6.0 Installer Guide
for a list of
languages supported by each profile. Check the programming
guide to determine which Profile was assigned to your system.
You can program
²¥ÞâÚ, the first language code,
on to a memory button. If you want subsequent languages to
display, you can keep pressing the button until the language
code you want appears on the display.
You cannot program
²¥ÞâÛ or ²¥ÞâÜ
onto a memory button.