Nortel Modular ICS 6.0, Manual

Page: 133 / 294

Tracking your incoming calls / 133
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Creating a password to your Call Log
To access your Call Log through a password:
1. Press
²¥¡Þ. The displays reads
New passwrd: .
2. Enter your four-digit password. The display reads
Repeat New:
.
3. Re-enter your four-digit password. The display reads
Password changed
, which confirms that your password
has been assigned.
To enter Call Log using your password:
1. Press
²¡ÚÛ to enter Call Log. If you have
programmed a password, the display reads
Password:
.
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in
programming. See
Using passwords
on page 214.
Changing your Call Log password
Use this procedure when you want to change the Call Log
password for your set.
1. Press
²¥¡Þ. The display reads
Old passwrd:
.
2. Enter your old password. The display reads
New passwrd:
.
3. Enter your new four-digit password. The display reads
Repeat New:
.
4. Re-enter your password. The display reads
Password changed
, which confirms that your password
has been changed.