Nortel Modular ICS 6.0, Manual

Page: 121 / 294

Communicating in the office / 121
P0992640 03 Modular ICS 6.0 System Coordinator Guide
send messages to analog telephones by pressing
²Ú.
Depending on the programming setup, the analog telephone
provides either a Stuttered Dial Tone or a Message Waiting
Lamp to inform the user of messages pending.
If your reply to a message is forwarded or is answered at
another telephone using the Call Pickup feature, the message
remains on your telephone until you cancel it or successfully
contact the telephone that sent the message.
For analog telephones connected to an ASM, the message
waiting indicator remains on until the user invokes
˚
£ßÞ. If the analog telephone has the Message
Reply Enhancement feature set to Yes, the message waiting
indicator is turned off automatically after the reply call is
answered no matter from where the call is answered.
For more information on the Message Reply Enhancement
feature, see the
Norstar Modular ICS 6.0 Installer Guide .
1. Press
²Ú.
2. On a telephone with a two-line display, press
ADD
.
Note: This step is not necessary on a telephone with a one-
line display.
3. Enter the internal number of the person to whom you want
to send the message. The person’s display reads
Message for you
.
4. On analog telephones connected to an Analog Station
Module (ASM), the message waiting indicator is activated.
Canceling a message you have sent
1. Press
²£Ú. The display reads
Cancel for: .
2. Enter the internal number of the person to whom you sent
the message.