Nortel Meridian SL-100 SE, Replacement

Page: 21 / 338

XPM card replacement procedures 21
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NTAX78AA
in a DTCI shelf
(continued)
4
Perform a switch of activity so the unit that contains the faulty
card becomes the inactive unit by typing
>SWACT
and pressing the Enter key.
Example of a MAP terminal response:
5 Confirm the switch of activity by typing
>YES
and pressing the Enter key.
Example of a MAP terminal response:
6 Busy the inactive unit of the PM that contains the card by typing
>BSY UNIT unit_no
and pressing the Enter key.
where
unit_no
is 0 or 1
Example of a MAP terminal response:
CAUTION
Loss of service
Service is lost if you remove the circuit card
from the active unit of the peripheral module
(PM).
DTCI 0 A Warm SwAct will be performed after
data sync of active terminals
Please confirm (“YES”, “Y”, “NO”, or “N”):
DTCI 0 SwAct Passed
DTCI 0 Unit 0 Bsy passed