Nortel Meridian SL-100 SE, Replacement

Page: 102 / 338

102 IPE card replacement procedures
555-4031-547 Standard 12.02 July 2002
NT5D11
in an IPE
(continued)
Replacing an NT5D11 card
At your current location
1 Proceed only if you have been directed to this card replacement
procedure from a step in a maintenance procedure, are using
6 Line processing on T-1
link failure On-hook
Off-hook
On
Off
7 Daisy chaining to the
HMI Yes
No
On
Off
8 HMI master Yes (master)
No (slave)
On
Off
Settings for DIP switch 2 (Sheet 2 of 2)
Switch
position
Characteristic Selection
Switch
setting
CPE or CSU distance settings
Distance
(feet) Switch 3
position Switch 4
position Switch 5
position
0 - 133 On Off Off
134 - 266 Off On On
267 - 399 Off On Off
400 - 533 Off Off On
534 - 655 Off Off Off
DANGER
Module front and rear covers are not hinged
Module front and rear covers are not hinged; do not
let go of the cover. Lift the cover away from the
module, and set the cover out of the work area.