Nortel Meridian Meridian 1, Planning, Installation And Operating Instructions

Page: 272 / 556

Chapter 20 — Meridian Mail Compact Option installation and maintenance Page 253 of 536
Option 11C Compact Planning, Installation, Fault Clearing and CCBR Guide
Starting Point: Meridian Mail System Status and Maintenance Menu.
Step Action
1 Select the “System Status” screen and perform a courtesy-down
procedure before starting on any of the following steps.
Note: Do this prior to starting any of the procedures described in this guide to
prevent calls from being abruptly terminated when the operation begins. For
more information, refer to the section “Disabling/Activating the system” in the
chapter “System Status and Maintenance” in the
System Administration Guide.
2 Insert the Meridian Mail Compact Option Install/data tape into the tape
drive.
Note: Refer to Procedure 42 in this guide for tape insertion instructions.
3 Press the reset button on the Meridian Mail Compact Option card.
Result Diagnostic routines are shown followed by a pause of
approximately five minutes while the tape is automatically retensioned.
4 When retensioning begins, the following message is displayed.
Tape retension
Note: Tape retension takes about 5 minutes, and it takes between 5 and 10
minutes to load the software.
Result Once loaded, the System Installation and Modification Menu is
displayed.