manualshive.com logo in svg

Nortel Meridian M3900, Reference Manual

Share
Download
Nortel Meridian M3900 Reference Manual Download Page 49

 49

Meridian SL-100 M3900 Meridian Digital Telephones Reference Guide

M3904 professional telephone

Purpose

This chapter describes the M3904 and its key configuration.

M3904 feature description

M3904 features

12 DNs with a five-line display.

Six self-labeled programmable line/feature keys with a second page of keys for a total of 12.

Four context-sensitive softkeys used to access context-sensitive softkey features.

Fixed feature/application keys for the following:

•

message

•

options

•

directory/log (call log/redial)

•

applications

•

shift

Fixed keys for the following:

•

hold

•

goodbye

•

mute (with LED)

•

volume UP/DOWN

•

headset (with LED)

•

handsfree/group listen (with LED)

Navigation keys (up, down, left and right).

Copy and quit keys for applications and features.

Handsfree calling with LED.

Five-line x 24-character display.

Summary of Contents for Meridian M3900













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands