88
Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu
Standard 2.1
3
Enter the digits
48378123 (GUEST123
), the default password, or the
current password, if you have customized the password, and then press the
Hold
key.
Result:
The telephone display asks if you want to display local IP
parameters:
Display Local IP?
[1-Yes 2-No]
IF you want to
THEN do the following:
display read-only
IP parameters,
1 Press
1
.
2 Press the
Hold
key.
Result:
The telephone display shows the remote
site’s current IP address, similar to the following:
IP Address
192.168.142.102
3 Press the
Hold
key.
Result:
The telephone display shows the remote
site’s current IP subnet mask, similar to the
following:
IP Subnet Mask
255.255.255.0
4 Press the
Hold
key.
Result:
The telephone display shows the remote
site’s current IP gateway, similar to the following:
IP Gateway
192.168.142.254
5 Press the
Hold
key.
6 Proceed to step 4 on page 89.
not display IP
parameters,
1 Press
2
.
2 Press the
Hold
key.
