Digital Telephone IP Adapter Installation and Administration Guide
71
January 2005
Installing the Digital Telephone IP Adapter unit
3
Unscrew and remove the footstand of the digital telephone.
Note:
Refer to “A” in the following diagram.
4
Punch out the front panels in the footstand of the telephone to make the
connections accessible when you install the Digital Telephone Internal IP
Adapter circuit card.
Note:
Refer to “B” in the preceding diagram.
Inserting the Digital Telephone Internal IP Adapter circuit card
To insert the Digital Telephone Internal IP Adapter circuit card into your digital
telephone:
1
Remove the Digital Telephone Internal IP Adapter circuit card from the
antistatic bag.
2
Insert the leading edge of the Digital Telephone Internal IP Adapter circuit
card under the two brackets on the footstand.
Note:
Refer to “C” in the following diagram for the location of the brackets.
G101492
A
B
