Nortel M2016S Secure Set, Quick Reference Manual

Page: 23 / 30

M2016S Secure Set display
23
M2016S Secure Set display
The 2-line by 24-character display makes the most sophisticated features
on your M2016S Secure Set easy to use. Screen prompts take you
step-by-step through procedures and keep you informed on the status of
various features such as Call Forward and Make Set Busy. Your display
can be tilted forward or back to an angle that allows you to see it best.
Whether your display is factory installed or added later, your top right
function key is designated as a
P
key. This key enters you into
the programming mode, where you can make adjustments to various
settings such as volume and display contrast. When you press the
P
key again to exit the programming mode, you lock the settings
until you reenter programming mode.
Programming
You can select the following adjustable features:
Under each of the above adjustable features on your display, it reads
SELECT OR SCROLL <<< >>>
.
For instance, if you are displaying
03 CALL TIMER ENABLE
, you can select
this feature by pushing
‚‹
, or you can push the right side of the
volume control bar once to scroll to
04 IDLE SCREEN FORMAT
or push the left
side of the volume control bar once to get to
02 CONTRAST ADJUSTMENT
.
Note: After any programming procedure press
P
to exit and
save the new setting.
02 CONTRAST ADJUSTMENT
03 CALL TIMER ENABLE
04 IDLE SCREEN FORMAT
05 LANGUAGE SELECTION
07 DISPLAY DIAGNOSTICS
09 KEY CLICK
00 VOLUME ADJUSTMENT
01 PREDIAL RECALL