Nortel LinkPlexer, Installation And Configuration Manual, Page: 73 / 196

Installation and Configuration Guide 73
October 2007 Installing LinkPlexer 6.0
Using Nortel License Manager
Introduction
Service Update (SU) 01 for LinkPlexer 6.0 introduces support for Nortel
License Manager. To take advantage of this feature, the License Manager
identified to distribute licenses to LinkPlexer must support the new license
features introduced to support LinkPlexer. The LinkPlexer configuration file
must be modified to configure LinkPlexer to connect to the License Manager.
Deployment Procedure
1 Update the license file on the target License Manager to support the new
LinkPlexer license features.
Note: The target License Manager can be NODAL or CORPORATE and
can be co-resident with or remote from LinkPlexer.
2 Restart the License Manager service.
3 Upgrade the existing LinkPlexer to LinkPlexer 6.0 and LP_6.0_SU_01. For
more information, see “Installing an SU for LinkPlexer 6.0” on page 82.
4 Configure LinkPlexer 6.0 to connect to the target License Manager. Add the
following to the LPConfig.ini file (values shown are samples only)
[LicenseManager]
UseLicenseManager=ON
MaxConnectedApplications=10
Address=192.192.192.192
Port=3998
LicenseType=NODAL
RetryIntervalSecs=30
MaxRetries=10
5 Start the LinkPlexer service.