Nortel LinkPlexer, Installation And Configuration Manual, Page: 41 / 196

Installation and Configuration Guide 41
October 2007 Installing and configuring pcAnywhere
6 To grant administrators full access to the pcAnywhere folder, in the
Permissions box, ensure the Allow check box is selected beside Full
Control.
7 Click OK to save your changes and close the Properties window.
Configuring an account in pcAnywhere 11.5 or later
Note: If you are using a modem connection with pcAnywhere, you must
configure your modem before you perform this procedure.
1 If it is not already started, start pcAnywhere 11.5 by logging on to the server
as the local administrator and clicking
Start > All Programs > Symantec
pcAnywhere .
Note: If the system asks you to register pcAnywhere, click Skip , and click
Yes to confirm.
2 On the pcAnywhere manager (left side), select the Hosts option.
3 On the File menu, choose New Item > Connection Wizard .
Result: The Connection Wizard - Connection Method window appears.
4 Select I want to use cable modem/DSL/LAN/dial-up Internet ISP .