Nortel LinkPlexer, Installation And Configuration Manual, Page: 147 / 196

Installation and Configuration Guide 147
October 2007 Configuring LinkPlexer for X.25/CompuCALL
Although the supported modem is the Motorola V.3600 modem, you can also
use the General Datacom (GDC) VF28.8 modem. Use the following table to
configure the GDC modems.
Subgroup Option
PC modem
choice DMS modem
choice
Quick Start Answer orig.
mode Orig if no ring Forced Answer
PLHDSK mode V34 Only V34 Only
SNHDSK mode V34 Auto V34 Auto
Max DCE Rate 19200 19200
Operating Mode Sync Data Sync Data
Network options Network Select PL 2W PL 2W
SN TX Level Permissive Permissive
PL TX Level -11 dBm -11 dBm
Autodial Rest Disable Disable
PL Look Back 10 minutes 10 minutes
PL Down Time 1 minute 1 minute
Terminal options DTE Speed Autobaud Speed Autobaud Speed
CPM Resp Speed Autobaud Speed Autobaud Speed
Char Length 10 7D PAR 10 7D PAR
Parity Auto Auto
Overspeed Nominal Nominal
DTE Flow Control RTS/CTS RTS/CTS
Terminal Echo Enable Enable
DCD Control ON Real