Nortel LinkPlexer Installation And Configuration Manual Download Page 115

Page: 115 / 196

Installation and Configuration Guide

115

October 2007

Configuring and maintaining LinkPlexer 6.0

In the

Link Sets

section, click

Add

Result:

The Linkset dialog box appears.

In the

Name

box, type the name for this link set.

Note:

The link set name is defined by the LinksetName parameter in the

LPConfig.ini file, and by the LINKSET parameter in the CS 2x00/DMS
switch SCAICOMS table.

Click

to return to the Add ICM customer to switch dialog box.

In the

Links

section, click

Add

Result:

The Link dialog box appears.

In the

Name

box, type the name of this link.

Password

SCAIGRP table,
PASSWORD parameter

Link Sets Name

TcpLinkSetName

SCAICOMS table,
LINKSET parameter

Parameter

LPConfig.ini file
parameter

CS 2x00/DMS switch
table and parameter

Summary of Contents for LinkPlexer





































































































































































































Search results

Summary of Contents for LinkPlexer

Reviews:

Nortel LinkPlexer, Installation And Configuration Manual, Page: 115 / 196

Search results

Summary of Contents for LinkPlexer

Reviews: