Installing the Aculab E1/PRI signaling option 4-7
Nortel IVR 2.5/S Aculab-Based E1 CAS/ISDN PRI Signaling Guide
Procedure 4-3: Installing the MRS ISDN PRI signaling options
1
Log in to the MRS or MRS/AP as
root
(refer to Appendix A for detailed
instructions on logging in and accessing the SCI).
2
At the
/sci>
prompt, type
install
and press <Enter>.
A warning message appears on the screen:
*******************************************************
WARNING - Executing this option will cause the system to
be
stopped. Once the Install Menu is entered the
only
way to restart operations will be to reboot the
VRU.
********************************************************
*****
A prompt then appears asking if you want to continue.
Are you sure you wish to continue?
Current continue = no
yes - Continue with operation.
no - Return to the previous menu.
Continue? =
3
Enter
y
and press <Enter> to continue with the installation.
The following messages are displayed:
Stopping the System Now!
.
.
(various messages)
.
/sci/install>
4
Wait until the Ready light on the front panel of the MRS begins flashing
before continuing. This step ensures that all MRS processes were
stopped. On the MRS/AP, there is no Ready light to observe (just
proceed to the next step).
ATTENTION
The installation script suspends all MRS processes and then displays
the
/sci/install>
prompt.