background image

_____________________________________________________________________________________ 

 www.support.avaya.com,

                                                   Page: 16                                                    11/4/2009 

Avaya Inc. – Proprietary.

 Use pursuant to Company Instructions. 

_____________________________________________________________________________________

 

 

Call Servers IP Address 

192.168.1.201 (Avaya Communication manager IP address). 

Router IP Address 

0.0.0.0 (Will be assigned by the VPN gateway or by the Internal DHCP 
server if the VPN gateway is configured as DHCP Relay). 

Subnet Mask 

0.0.0.0 (Will be assigned by the VPN gateway or by the Internal DHCP 
server if the VPN gateway is configured as DHCP Relay). 

Http Server 

A.B.C.D (Internal HTTP server IP address in dotted decimal format from the 
network which contains the Avaya Communication Manager). 

Https Server IP Address 

 A.B.C.D (Internal HTTPS server IP address in dotted decimal format from 
the network which contains the Avaya Communication Manager). 

802.1Q Auto 

VLAN ID 

VLAN Test 

60 

 

Press Exit to come out of the “ADDR” procedures. 

 

2.  Scroll down to the last option VPN. Note that the VPN configuration parameters will not be edited until the 
value of “VPNPROC” parameter is set to 2. (To do this open the upload directory of file server, open the file 
46xxsettings.txt file and append it with “SET VPNPROC 2” and upload this new 46xxsettings.txt file into the 
avaya 96xx IP phone). It is recommended to set the value of VPNPROC to 2 while uploading the vpn enabled 
binary into the phone. Use Right Navigation key to go to the next screen options. (Note that the values will not 
be saved until Right-Navigation key is pressed even if “Save button is pressed”). The External addresses will be 
reflected only after rebooting the phone.  

 

The configuration values of one of the 96xx series IP Phones used in the sample configurations are shown in 

Table 2 

below. 

 

No. Option 

Value 

1 VPN 

Enabled 

2 VPN 

Vendor 

Nortel 

3 Gateway 

Address 

192.168.8.200 (FQDN or the IP Address (in 
dotted decimal format) of the VPN gateway 
‘Untrust’ Interface) 

External Phone IP Address 

192.168.40.143 (Phone IP address from the list 
of the local home network IP addresses). 

5 External 

Router 

192.168.40.1 (External Router IP address of the 
home Network). 

External Subnet Mask 

255.255.255.0 (External Subnet Mask of the 
home Network). 

External DNS Server 

0.0.0.0 (Provided by the local Service Provider) 

8 Encapsulation 

4500-4500 

9 Copy 

TOS 

NO 

10 Auth. 

Type: 

Local Credentials. 

11 VPN 

User 

Type: 

Any 

12 

VPN User: 

Vpn1 (vpn username) 

Summary of Contents for Contivity 110

























Reviews: