Nortel Contivity 100, Setting Up

Page: 69 / 78

Chapter 6 Out-of-band management support 69
Setting Up the Contivity 100 Unit
Figure 15 HyperTerminal COM1 Properties dialog box
6
From the Bits per second list, select 9600 to set the modem speed, and then
click OK.
HyperTerminal establishes a connection to the modem and the cursor is
positioned in the main HyperTerminal dialog box.
7 Enter:
ats0=1&w
This command instructs the modem to answer on the first ring and saves the
settings to the modem. Some modems respond with “OK” or a similar
message when the settings are saved to the modem.
8 Disconnect the modem from the PC.
Note: The connection speed must match the unit’s AUX port connection
speed. If you are using a modem and terminal emulation software that
supports 115200 baud, select 115200 baud.