Nortel Compact ICS 7.1, Coordinator Manual

Page: 99 / 266

Time savers for making calls / 99
N0130955 01 Compact ICS 7.1 System Coordinator Guide
Using Speed Dial
Norstar provides two types of speed dialing: system and user.
• System Speed Dial programming allows you to assign three-digit
speed dial codes to the external numbers your co-workers call most
frequently.
• User Speed Dial programming allows individuals to program their
own speed dial numbers.
Speed dial numbers are subject to the same restriction filters as regularly
dialed numbers. Your installer or customer service representative can
program system speed dial numbers to bypass dialing restrictions.
Speed dial numbers may include host system signaling codes.
Changing and adding System Speed Dials
System Speed Dial codes are numbered from 001 to 255. The system
coordinator assigns numbers to System Speed Dial codes for the entire
system. See ‘‘Adding or changing a system speed dial’’ on page 29.
Adding or changing a User Speed Dial
≤•›
To add or change a User Speed Dial number on your telephone:
1. Press
≤•›
.
2. Enter a three-digit code from 256 to 279 that you want to associate
with a telephone number.
3. To include a line selection for this number, press the line or intercom
button. To select a line pool, press a programmed line pool button, or
press the intercom button, and enter a line pool access code or
destination code.
Tip -
There is no difference between using User Speed
Dial and using System Speed Dial. They differ only in
how you program them.