Nortel Compact ICS 7.1, Coordinator Manual

Page: 67 / 266

Answering calls / 67
N0130955 01 Compact ICS 7.1 System Coordinator Guide
phones, this button is assigned as a handsfree-only button. The mute button
is located under the dial pad.
The handsfree setting for 7316E digital phones only displays
Auto
or
None
. The handsfree button on this set is located under the dialpad. If
Handsfree
is set to
None
, the handsfree button does not function. Also, if
the 7316E is attached to a system with software older than version 6.1, it
acts like the 7316 telephone, and the handsfree button under the dial pad is
not active.
Changing handsfree answerback for a telephone
Handsfree answerback allows you to answer a voice call without lifting the
handset.
It is always turned off for an 7000 and 7100 digital phones, analog
telephones, and the Digital Mobility phones.
You can turn handsfree answerback on or off for a telephone that is
programmed to use handsfree.
1. Place the programming template over the appropriate buttons of the
programming telephone.
2. Press
≤••¤flfl‹››
.
3. Press
¤‹fl›fl
(the default System Coordinator password).
4. Press
≠
and enter the internal number of the telephone you
want to program.
5. Press
≠
twice.
6. Press
‘
four times.
7. Choose a setting (Yes or No) at
HF answerback:
using the
CHANGE
button.