Nortel Compact ICS 7.1, Coordinator Manual

Page: 113 / 266

Transferring calls / 113
N0130955 01 Compact ICS 7.1 System Coordinator Guide
Displays
Using Callback
When you direct a call you have answered to another telephone, the system
monitors the call to make sure it is answered. If no one answers the call
within a set length of time, the system directs it back to you.
Callback generates a variety of displays. Most occur after a set delay. Some
occur immediately if the telephone to which you are directing a call is out
of service or otherwise unavailable. These are listed with the descriptions
of the specific features like Transfer or Camp-on.
The person you were talking to has already
parked your call. You cannot park the same call.
You have attempted to use Call Park with no
active call on your telephone. If the call you want
to park is on hold, reconnect to it before you park
it.
You have entered an invalid retrieval code.
There was no call on the retrieval code you
entered.
You have tried to park a conference call. Split the
conference and park the calls separately. The
person who retrieves the calls can reconnect the
conference.
Record the code shown. Use Page (
≤fl‚
)
or press
PAGE
to announce the call and its
retrieval code.
All available retrieval codes are in use. Transfer
the call or take a message instead.
For other displays, see ‘‘Common feature displays’’ on page 243.
Already parked
Get call first
Invalid number
No call on: 101
Park denied
Parked on: 402
PAGE EXIT
Parking full