Nortel CallPilot 1001rp, Installation And Configuration Manual

Page: 99 / 368

October 2002 Using CallPilot Manager to monitor hardware
Part 5: 1001rp Server Maintenance and Diagnostics 99
To start or stop a component
1 In CallPilot Manager, click Maintenance
➝
Maintenance Admin.
Result: The Maintenance page appears.
2 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
3 Continue clicking the plus sign (+) until the component with which you
want to work is visible.
4 Click the hardware component that you want to start or stop.
Result: The Maintenance page refreshes to show details about the
component.
MPB board Takes all call processing resources on the
selected board out of service.
Time Switch You cannot perform maintenance administration
on the timeswitch.
MPCs (embedded on MPB
boards or on MPC-8 cards) Takes the selected MPC out of service.
DSPs Takes the selected DSP out of service.
Channels Takes the selected DS30X channel out of
service.
DS30X link Takes the selected DS30X link out of service.
Component Effect of stopping