Nortel business policy switch 2000, User Manual

Page: 62 / 412

62
Using the Business Policy Switch 2000 Version 2.0
Use a text editor to edit the ASCII configuration; the command format is the same
as that of the CLI.
You can initiate the ASCII configuration file download using CLI commands only
while connected to the base unit, and the ASCII configuration script will execute
to completion. When you initiate downloading the ASCII configuration file from
the console interface, the console does not display output. For this reason, it is
important that you review the commands in the file to ensure accuracy and
completeness.
For information on setting the parameters for the ASCII configuration file feature,
refer to
Chapter 3.
Sample ASCII configuration file
This section shows a sample ASCII configuration file. This file is an example only
and shows a basic configuration for a standalone BPS 2000 that includes
Multi-Link Trunking, VLANs, port speed and duplex, and SNMP configurations.
! -------------------------------------------------------
! example script to configure different features from CLI
! -------------------------------------------------------
!
enable
configure terminal
!
!
! -------------------------------------------------------
! add several MLTs and enable
! -------------------------------------------------------
mlt 3 name lag3 enable member 13-14
mlt 4 name lag4 enable member 15-16
mlt 5 name lag5 enable member 17-18
!
!
! -------------------------------------------------------
! add vlans and ports