Nortel BSR222, Configuration, Page: 83 / 451

Chapter 5 System screens 83
Nortel Business Secure Router 222 Configuration — Basics
Configuring Password
To change the password of your Business Secure Router (recommended), click
SYSTEM , then the Password tab. The screen illustrated in Figure 16 appears. In
this screen, you can change password of the Business Secure Router.
Password Enter the password associated with your username (up to 31
characters).
Enable Wildcard Select the check box to enable DYNDNS Wildcard.
Off Line This option is available when CustomDNS is selected in the
DDNS Type field . Check with your Dynamic DNS service
provider to have traffic redirected to a URL (that you can
specify) while you are off line.
IP Address Update
Policy:
DDNS Server Auto
Detect IP Address Select this option only when there are one or more NAT routers
between the Business Secure Router and the DDNS server.
This feature has the DDNS server automatically detect and use
the IP address of the NAT router that has a public IP address.
Note: The DDNS server not be able to detect the proper IP
address if there is an HTTP proxy server between the Business
Secure Router and the DDNS server.
Use Specified IP
Address Select this option to update the IP address of the host names to
the IP address specified below. Use this option if you have a
static IP address.
Use IP Address Enter the IP address if you select the User Specify option.
Apply Click Apply to save your changes to the Business Secure
Router.
Reset Click Reset to return to the previously saved settings.
Table 9 DDNS
Label Description